OK:
It makes an operating sound (click).
NG -- REPLACE PNEUMATIC W/TUBE TANK ASSEMBLY
OK -- Continue to next step.
8. INSPECT HEIGHT CONTROL COMPRESSOR ASSEMBLY (COMPRESSOR MOTOR)
(a) Turn the engine switch off.
(b) Disconnect the compressor motor connector.
(c) Connect a positive (+) lead from the battery to terminal 1 (B) and a negative (-) lead to terminal 2 (E).
(d) Check the operating of the compressor motor.
OK:
Motor operates
Text in Illustration
NOTICE:
- Do not operate the height control compressor for 60 seconds or more.
- Since a short and a lock-up inside the height control compressor cause excessive current to flow, stop operation immediately
when it does not rotate.
NG -- REPLACE HEIGHT CONTROL COMPRESSOR ASSEMBLY See: Steering and Suspension/Suspension/Suspension
Control ( Automatic - Electronic )/Compressor/Pump/Service and Repair/Removal
OK -- Continue to next step.
9. INSPECT AIR SUS RELAY
(a) Turn the engine switch off.
(b) Remove the AIR SUS relay from the engine room J/B.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE AIR SUS RELAY
OK -- REPLACE SUSPENSION CONTROL ECU
No comments:
Post a Comment