2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 371

HINT

- DTC C1405 is for the front speed sensor RH.

- DTC C1406 is for the front speed sensor LH.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

When replacing the brake actuator assembly, perform zero point calibration and store system information See: Brakes and

Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MOMENTARY INTERRUPTION)

(a) Using the Techstream, check for any momentary interruption in the wire harness and connector corresponding to the DTC See:

Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Component Tests and General

Diagnostics/Check for Intermittent Problems.

ABS/VSC/TRAC

OK:

There are no momentary interruptions.

HINT

Perform the above inspection before removing the sensor and connector.

NG -- CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU - FRONT SPEED SENSOR)

OK -- Continue to next step.