(d) Enter the following menus: Body Electrical / Air Conditioner / Data List.
(e) Check the value(s) by referring to the table below.
Air Conditioner
OK:
The display is as specified in the Normal Condition column.
Result:
C -- REPLACE A/C COMPRESSOR (A/C MASS FLOW SENSOR)
B -- REPLACE A/C AMPLIFIER
A -- Continue to next step.
2. READ VALUE USING TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Air Conditioner / Data List.
(e) Check the value(s) by referring to the table below.
Air Conditioner
Result:
B -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE See: Heating and Air
Conditioning/Testing and Inspection/Symptom Related Diagnostic Procedures
A -- Continue to next step.
3. REPLACE A/C COMPRESSOR (A/C MASS FLOW SENSOR)
(a) Replace the A/C compressor (A/C mass flow sensor) See: Heating and Air Conditioning/Compressor HVAC/Service and
Repair/Removal and Replacement/Removal.
HINT
Since the A/C compressor (A/C mass flow sensor) cannot be inspected while it is removed from the vehicle, replace the A/C
No comments:
Post a Comment