(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
Result:
HINT
- If DTC C1611 is output, perform the procedure to allow the parking assist ECU to store the vehicle information again.
- If DTC C1611 is still output after performing the procedure to make the parking assist ECU store the vehicle information 3
times, replace the parking assist ECU.
- If DTC C1611 is output frequently, replace the parking assist ECU even though the DTC is not output when rechecking for
DTCs.
B -- END
A -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
Up to 08/2009
PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM (w/ Side Monitor System): C1611: ECU Malfunction
C1611 - ECU Malfunction
DESCRIPTION
This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check.
HINT
If the parking assist ECU cannot read the stored information when it is activated, the parking assist ECU judges that there is an
internal malfunction and stores this DTC.
INSPECTION PROCEDURE
PROCEDURE
1. READ VALUE USING TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Parking Assist Monitor System / Data List.
(e) Check the Data List for proper functioning of the following items.
Parking Assist Monitor System
No comments:
Post a Comment