2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1332

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

*1: w/ Navigation System

*2: w/o Navigation System

NG -- REPLACE INSTRUMENT PANEL WIRE

OK -- REPLACE NO. 2 INSTRUMENT PANEL WIRE

4. CHECK INSTRUMENT PANEL WIRE (SHORT TO B+)

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Disconnect the instrument panel wire from the No. 2 instrument panel wire.

(d) Connect the cable to the negative (-) battery terminal.

(e) Turn the engine switch on (IG).

(f) Measure the voltage according to the value(s) in the table below.