2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 1385

Knock Sensor Range Check (High Voltage): P0328 and P0333

COMPONENT OPERATING RANGE

CONFIRMATION DRIVING PATTERN

- Connect the Techstream to the DLC3.

- Turn the engine switch on (IG) and turn the Techstream on.

- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) See: Powertrain Management/Computers and Control

Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.

- Turn the engine switch off.

- Turn the engine switch on (IG) and turn the Techstream on [A].

- Start the engine and wait 10 seconds.

- Enter the following menus: Powertrain / Engine / Utility / All Readiness.

- Input the DTC: P0327, P0328, P0332 or P0333.

- Check the DTC judgment result [B].

HINT

- If the judgment result shows ABNORMAL, the system has a malfunction.

- If the judgment result shows INCOMPLETE or UNKNOWN, idle the engine for 5 minutes and check the DTC judgment

result again [C].

- If the test result is UNKNOWN, enter the following menus: Powertrain / Engine / Trouble Codes / Pending.