Text in Illustration
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
3. CHECK REAR TELEVISION CAMERA ASSEMBLY (CB+, CGND)
(a) Disconnect the Y14 connector from the rear television camera assembly.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
4. CHECK PARKING ASSIST ECU (CV+, GND1)
(a) Reconnect the Y14 connector to the rear television camera assembly.
(b) Reconnect the F54 and F55 connectors to the parking assist ECU.
(c) Check the waveform of the rear television camera assembly using an oscilloscope.
No comments:
Post a Comment