- Turn the engine switch on (IG) and turn the Techstream on [A].
- Start the engine.
- After starting the engine, wait 5 seconds [B].
- Enter the following menus: Powertrain / Engine / Utility / All Readiness.
- Input the DTC: P0230.
- Check the DTC judgment result [C].
HINT
If the judgment result shows ABNORMAL, the system has a malfunction.
- If the test result is UNKNOWN, enter the following menus: Powertrain / Engine / Trouble Codes / Pending.
- Read Pending DTCs.
HINT
If a pending DTC is output, the system is malfunctioning.
- If the test result is INCOMPLETE or UNKNOWN and no pending DTC is output, perform a universal trip and check for permanent DTCs
See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC
Check / Clear.
HINT
- If a permanent DTC is output, the system is malfunctioning.
- If no permanent DTC is output, the system is normal.
No comments:
Post a Comment