INSPECTION PROCEDURE
NOTICE:
When replacing the brake actuator assembly, perform zero point calibration and store system information See: Brakes and
Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning.
HINT
When DTC C1241 and/or C1417 is output together with DTC C0273, C0274 and/or C1361, inspect and repair the trouble areas
indicated by DTC C1241 and/or C1417 first See: C1241, or See: C1417).
PROCEDURE
1. PERFORM ACTIVE TEST USING TECHSTREAM (ABS MOTOR RELAY)
(a) Connect the Techstream to the DLC3.
(b) Start the engine.
(c) Select the Active Test on the Techstream See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Scan Tool Testing and Procedures/Data List / Active Test.
ABS/VSC/TRAC
(d) Check for operating sound of the ABS motor relay when operating it using the Techstream.
Result:
B -- RECONFIRM DTC
A -- Continue to next step.
2. INSPECT ABS NO.1 FUSE
(a) Turn the engine switch off.
No comments:
Post a Comment