2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2622

(c) Turn the engine switch on (IG).

(d) Turn the Techstream on.

(e) Check that the steering column contracts and extends. Enter the following menus: Body Electrical / Tilt & Telescopic / Active Test.

Tilt & Telescopic

OK:

The steering column contracts and extends.

NG -- CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - TELESCOPIC POSITION

SENSOR)

OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - BATTERY)

(a) Disconnect the F36 multiplex tilt and telescopic ECU connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Text in Illustration

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - BODY GROUND)

(a) Measure the resistance according to the value(s) in the table below.