NG -- CHECK FRONT DOOR WIRE LH (SHORT TO B+)
OK -- Continue to next step.
40. CHECK WIRE HARNESS (SHORT TO GROUND)
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE LH (SHORT TO GROUND)
OK -- Continue to next step.
41. CHECK REAR AIRBAG SENSOR LH
(a) Connect the connector to the side airbag sensor LH (for rear side) and side airbag sensor LH (for front side).
(b) Interchange the rear airbag sensor RH with LH and connect the connectors.
(c) Connect the cable to the negative (-) battery terminal.
(d) Turn the engine switch on (IG), and wait for at least 60 seconds.
(e) Clear the DTCs stored in the the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and
No comments:
Post a Comment