HINT
- Before installing a new tire pressure warning valve and transmitter, read and write down its transmitter ID.
- The IDs for the tire pressure warning valve and transmitters that are not replaced should be checked using the tester and
recorded.
(b) Set the tire pressure to the specified value See: Maintenance/Wheels and Tires/Testing and Inspection/Component Tests and General
Diagnostics.
NEXT -- Continue to next step.
3. REGISTRATION OF TRANSMITTER ID
(a) Register the transmitter IDs for all wheels See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing
and Inspection/Programming and Relearning/Registration.
NEXT -- Continue to next step.
4. PERFORM INITIALIZATION
(a) Perform initialization See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Programming and Relearning/Initialization.
NEXT -- Continue to next step.
5. CONFIRM TIRE INFLATION PRESSURE (DATA LIST)
(a) Turn the engine switch off.
(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG) and turn the tester on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
No comments:
Post a Comment