(d) Measure the voltage between terminals 2 (SHRR) and 1 (SHG) while slowly moving the link up and down.
Standard Voltage:
Text in Illustration
NG -- REPLACE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH See: Lighting and Horns/Headlamp/Headlamp
Alignment Sensor/Service and Repair/Components
OK -- REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) See: Lighting and Horns/Headlamp/Headlamp
Alignment Control Module/Service and Repair/Components
5. CHECK HARNESS AND CONNECTOR (AFS ECU - REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH)
(a) Disconnect the A53 AFS ECU (headlight swivel ECU assembly) connector.
(b) Disconnect the R4 rear height control sensor sub-assembly RH connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
No comments:
Post a Comment