HINT
- *: It may take about 2 or 3 minutes until the values are displayed.
- When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
Result:
B -- END
A -- REPLACE TIRE PRESSURE WARNING ECU
Up to 08/2009
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2141/41-C2145/45: Transmitter ID1 Error
DESCRIPTION
The tire pressure warning valve and transmitters that are installed in the tire and wheel assemblies measure the tire pressure. The measured values are
transmitted to the tire pressure warning antenna and receiver on the body as radio waves and then sent to the tire pressure warning ECU. The ECU
compares the measured air pressure values with the air pressure threshold. When the measured air pressure value is less than this threshold, the
warning light in the combination meter turns on.
When the internal circuit of a tire pressure warning valve and transmitter is malfunctioning, one of these DTCs will be output.
No comments:
Post a Comment