11 to 14 V
NG -- INSPECT CHARGING SYSTEM
OK -- Continue to next step.
3. CHECK WIRE HARNESS (4WD CONTROL ECU - BATTERY)
(a) Disconnect the ECU connector.
(b) Measure the voltage of the wire harness side connector.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. CHECK WIRE HARNESS (4WD CONTROL ECU - BODY GROUND)
(a) Disconnect the ECU connector.
(b) Measure the resistance of the wire harness side connector.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. RECONFIRM DTC
(a) Clear the DTC See: Transmission and Drivetrain/Transfer Case/Testing and Inspection/Reading and Clearing Diagnostic Trouble
No comments:
Post a Comment