HINT
*: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform
troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 See: C2121.
(h) Check the DATA LIST.
Result:
NOTICE:
- When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
- Record the transmitter IDs and positions of transmitters that are normal.
(i) When the "ID Tire Inflation Pressure" data (ID1 to ID5) has changed, repeat this procedure to identify the tire pressure warning valve
and transmitter that corresponds to the DTC.
(j) When all of the "ID Tire Inflation Pressure" data (ID1 to ID5) has changed, identify the malfunctioning tire pressure warning valve
and transmitter using the recorded ID numbers and output DTCs.
(k) Set the tire pressures to the appropriate specified values See: Maintenance/Wheels and Tires/Testing and Inspection/Component
Tests and General Diagnostics.
NEXT -- Continue to next step.
2. REPLACE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Replace the identified tire pressure warning valve and transmitter with a new one See: Instrument Panel, Gauges and Warning
Indicators/Tire Monitoring System/Tire Pressure Sensor/Service and Repair/Removal and Replacement/Removal.
No comments:
Post a Comment