NG -- REPLACE FLOOR WIRE
OK -- REPLACE FRONT SEAT WIRE RH
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION SYSTEM: B1793: Occupant Classification Sensor Power
Supply Circuit Malfunction
B1793 - Occupant Classification Sensor Power Supply Circuit Malfunction
DESCRIPTION
The occupant classification sensor power supply circuit consists of the occupant classification ECU and occupant classification sensors.
DTC B1793 is stored when a malfunction is detected in the occupant classification sensor power supply circuit.
HINT
When DTC B1650/32 is detected as a result of troubleshooting for the airbag system, check the DTCs stored in the occupant
classification ECU. When DTC B1793 is output, perform troubleshooting for the DTC.
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT
* If troubleshooting (wire harness inspection) is difficult to perform, remove the front passenger seat installation bolts to see
under the seat cushion.
* In the above case, hold the seat so that it does not fall down. Hold the seat only as necessary because holding the seat for a long
period of time may cause seat rail deformation.
No comments:
Post a Comment