NEXT -- Continue to next step.
4. CHECK REGISTRATION OF TRANSMITTER ID
(a) Register the transmitter IDs for all wheels See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing
and Inspection/Programming and Relearning/Registration.
NEXT -- Continue to next step.
5. PERFORM INITIALIZATION
(a) Perform initialization See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Programming and Relearning/Initialization.
NEXT -- Continue to next step.
6. CONFIRM TIRE INFLATION PRESSURE (DATA LIST)
(a) Turn the engine switch off.
(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG) and turn the tester on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
Tire Pressure Monitor
HINT
- *: It may take about 2 or 3 minutes until the values are displayed.
- When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
No comments:
Post a Comment