Text in Illustration
NG -- CHECK INSTRUMENT PANEL WIRE (SHORT TO B+)
OK -- Continue to next step.
5. CHECK FRONT AIRBAG SENSOR LH CIRCUIT (SHORT TO GROUND)
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK INSTRUMENT PANEL WIRE (SHORT TO GROUND)
OK -- Continue to next step.
6. CHECK FRONT AIRBAG SENSOR LH
(a) Connect the connector to the center airbag sensor assembly.
(b) Interchange the front airbag sensor RH with LH and connect the connectors.
No comments:
Post a Comment