(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(c) Reconnect the park/neutral position switch assembly connector.
NG -- REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY See: Sensors and Switches/Sensors and Switches -
Starting and Charging/Neutral Safety Switch/Service and Repair/U660E Automatic Transaxle/Removal
OK -- GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Smart Access System With Push-Button Start
(for Start Function)/How To Proceed With Troubleshooting
From 08/2009
2GR-FE ENGINE CONTROL: SFI SYSTEM: P0617: Starter Relay Circuit High
P0617 - Starter Relay Circuit High
DESCRIPTION
While the engine is being cranked, positive battery voltage is applied to terminal STA of the ECM.
If the ECM detects the starter (STA) signal while the vehicle is being driven, it determines that there is a malfunction in the STA circuit. The ECM
then illuminates the MIL and sets the DTC.
This monitor runs when the vehicle is driven at 12.43 mph (20 km/h) or more for over 20 seconds.
No comments:
Post a Comment