(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE FLOOR WIRE
OK -- Continue to next step.
26. CHECK FLOOR WIRE (OPEN)
(a) Using SST, connect terminals 4 (BCR+) and 3 (BCR-) of connector C.
NOTICE:
Do not forcibly insert SST into the terminals of the connector when connecting.
SST : 09843-18040
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE FLOOR WIRE
OK -- Continue to next step.
Part 2
27. CHECK FLOOR WIRE (SHORT)
(a) Disconnect SST from connector C.
No comments:
Post a Comment