Repair/Removal
A -- CHECK FOR INTERMITTENT PROBLEMS
Up to 08/2009
U660E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P062F: Internal Control Module
EEPROM Error
P062F - Internal Control Module EEPROM Error
DESCRIPTION
The TCM monitors its internal operation and it will set this DTC when it detects an internal malfunction.
MONITOR DESCRIPTION
The TCM monitors its internal operation. If the internal operation is malfunctioning, the TCM illuminates the MIL and sets a DTC.
MONITOR STRATEGY
TYPICAL ENABLING CONDITIONS
TYPICAL MALFUNCTION THRESHOLDS
INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/U660E Automatic Transaxle
System/DTC Check / Clear.
PROCEDURE
1. READ OUTPUT DTC (DTC P062F)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Clear DTCs See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/U660E Automatic Transaxle System/DTC Check / Clear.
(e) Turn the engine switch off and turn the Techstream off.
No comments:
Post a Comment