4. CHECK HARNESS AND CONNECTOR (DCM (TELEMATICS TRANSCEIVER) - MAP LIGHT ASSEMBLY)
(a) Disconnect the G25 DCM (Telematics Transceiver) connector.
(b) Disconnect the T10 map light assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. REPLACE DCM (TELEMATICS TRANSCEIVER)
(a) Replace the DCM (Telematics Transceiver) See: Accessories and Optional Equipment/Emergency Contact Module/Service and
Repair/Removal.
NOTICE:
* The engine switch must be off.
* Do not swap the DCM (Telematics Transceiver) with one from another vehicle.
NEXT -- PERFORM DCM ACTIVATION See: Accessories and Optional Equipment/Emergency Contact Module/Testing and
Inspection/Scan Tool Testing and Procedures/DCM Activation
Up to 08/2009
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Navigation System): B15DF: USB Communication Malfunction
B15DF - USB Communication Malfunction
DESCRIPTION
This DTC is stored when a malfunction occurs in communication error with USB device or "iPod".
No comments:
Post a Comment