(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (MOST COMMUNICATION LINE)
(a) Disconnect the display and navigation module display connector.
(b) Disconnect the stereo component amplifier assembly connector.
(c) Disconnect the radio receiver assembly connector.
(d) Measure the resistance between the display and navigation module display and stereo component amplifier assembly according to the
value(s) in the table below.
No comments:
Post a Comment