Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and Repair/Rear Power Window
Switch/Removal
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (REAR LH SWITCH - REAR LH MOTOR)
(a) Disconnect the power window regulator motor assembly (for rear LH side) connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
11. READ VALUE USING TECHSTREAM (RR-Door Motor)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / RR-Door Motor / Data List.
(e) Read the Data List according to the display on the Techstream.
RR-Door Motor (Power Window Regulator Motor Assembly (for Rear RH Side))
No comments:
Post a Comment