INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1. CHECK FOR DTC
(a) Clear the DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Check for DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
OK:
DTC B2410 or B2411 is not output.
NG -- CHECK HARNESS AND CONNECTOR (BATTERY - AFS ECU)
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
2. CHECK HARNESS AND CONNECTOR (BATTERY - AFS ECU)
(a) Disconnect the A53 AFS ECU (headlight swivel ECU assembly) connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
No comments:
Post a Comment