(b) Measure the resistance and check for pulses according to the value(s) in the table below.
Standard Resistance:
Standard:
Text in Illustration
NG -- REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Alarm Module/Service and Repair/Removal
OK -- Continue to next step.
5. REPLACE FRONT DOOR OUTSIDE HANDLE ASSEMBLY (for Front Passenger Side)
(a) Replace the front door outside handle assembly (for front passenger side) See: Accessories and Optional Equipment/Antitheft and
Alarm Systems/Keyless Entry/Antenna - Keyless Entry/Service and Repair/Entry Lock and Unlock Switch/Removal.
NEXT -- Continue to next step.
6. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Smart Access System With Push-Button Start (for Entry Function).
(b) Recheck for DTCs.
OK:
DTC B27A2 is not output.
NG -- REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) See: Accessories and Optional
Equipment/Antitheft and Alarm Systems/Alarm Module/Service and Repair/Removal
OK -- END (FRONT DOOR OUTSIDE HANDLE ASSEMBLY WAS DEFECTIVE)
From 08/2009
THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function): B27A2:
No comments:
Post a Comment