TYPICAL MALFUNCTION THRESHOLDS
Advanced Camshaft Timing
Retarded Camshaft Timing
CONFIRMATION DRIVING PATTERN
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG) and turn the Techstream on.
- Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure) See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear.
- Turn the engine switch off.
- Turn the engine switch on (IG) and turn the Techstream on [A].
- Start the engine and warm it up until the engine coolant temperature reaches 75锟斤拷C (167锟斤拷F) or more [B].
- Drive the vehicle for 5 minutes or more [C].
- Idle the engine for 30 seconds or more [D].
- Enter the following menus: Powertrain / Engine / Utility / All Readiness.
- Input the DTC: P0014, P0015, P0024 or P0025.
- Check the DTC judgment result [E].
No comments:
Post a Comment