Repair/Heated Oxygen Sensor/Removal.
NEXT -- Continue to next step.
13. PERFORM CONFIRMATION DRIVING PATTERN
(a) Refer to the confirmation driving pattern for P0136, P0137, P0138, P0156, P0157 and P0158.
NEXT -- Continue to next step.
14. CHECK WHETHER DTC OUTPUT RECURS (DTC P0136, P0137, P0138, P0156, P0157 OR P0158)
(a) Connect the Techstream to the DLC3.
(b) Turn the Techstream on.
(c) Enter the following menus: Powertrain / Engine / Utility / All Readiness.
(d) Input DTC: P0136, P0137, P0138, P0156, P0157 or P0158.
(e) Check the DTC Monitor is NORMAL. If DTC Monitor is INCOMPLETE, perform the driving pattern adding the vehicle speed.
Result:
B -- REPLACE AIR FUEL RATIO SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen
Sensor/Service and Repair/Air Fuel Ratio Sensor/Removal
A -- END
15. REPLACE AIR FUEL RATIO SENSOR
(a) Replace the air fuel ratio sensor See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and
Repair/Air Fuel Ratio Sensor/Removal.
NEXT -- Continue to next step.
16. PERFORM CONFIRMATION DRIVING PATTERN
(a) Refer to the confirmation driving pattern for P0136, P0137, P0138, P0156, P0157 and P0158.
NEXT -- Continue to next step.
17. CHECK WHETHER DTC OUTPUT RECURS (DTC P0136, P0138, P0158 OR P0158)
(a) Connect the Techstream to the DLC3.
(b) Turn the Techstream on.
(c) Enter the following menus: Powertrain / Engine / Utility / All Readiness.
(d) Input DTC: P0136, P0138, P0156 or P0158.
(e) Check the DTC judgment result.
No comments:
Post a Comment