(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Disconnect the front door wire RH connector from the floor wire.
(d) Connect the cable to the negative (-) battery terminal.
(e) Turn the engine switch on (IG).
(f) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE FRONT DOOR WIRE RH
OK -- REPLACE FLOOR WIRE
54. CHECK FRONT DOOR WIRE RH (SHORT TO GROUND)
(a) Disconnect the front door wire RH connector from the floor wire.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment