INSPECTION PROCEDURE
PROCEDURE
1. CHECK PRESENT DTC
(a) Turn the engine switch on (IG), and wait for at least 60 seconds.
(b) Check the present DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear.
Result:
HINT
* DTCs indicating communication errors will be changed to DTCs indicating errors in initialization by turning the engine switch
off and then on (IG) again.
* Codes other than present DTC B1622, B1623, B1632, B1633, B1642, B1643, B1692, B1693 and 81 may be output at this time,
but they are not related to this check.
E -- CHECK PRESENT DTC
D -- CHECK CONNECTORS
C -- CHECK PAST DTC
B -- CHECK CONNECTORS
A -- Continue to next step.
2. CHECK PAST DTC
(a) Turn the engine switch on (IG), and wait for at least 60 seconds.
(b) Check the past DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear.
No comments:
Post a Comment