C -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side) See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
B -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
A -- Continue to next step.
2. PERFORM INITIALIZATION (APPLICABLE LOCATION)
(a) Initialize the power window regulator motor assembly See: Windows and Glass/Windows/Testing and Inspection/Programming and
Relearning/Initialization.
HINT
Initialize the power window regulator motor assembly that has DTC B2311 stored in its ECU.
NEXT -- Continue to next step.
3. CHECK POWER WINDOW CONTROL SYSTEM (APPLICABLE LOCATION)
(a) Check that the power window operates normally by opening and closing the window See: Windows and Glass/Windows/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Operation Check.
HINT
Check the power window operation of the window where DTC B2311 has been stored.
OK:
Each power window operates normally.
Result:
E -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
D -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
C -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side) See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
B -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Front Door/Front Door Window Regulator/Service and Repair/Removal
A -- Continue to next step.
4. CHECK WHETHER PARTS HAVE BEEN INSTALLED CORRECTLY
(a) Check that the power window components are installed correctly.
OK:
Power window components are installed correctly.
HINT
When the power window components are installed correctly, the problem has occurred because the battery is disconnected while
the engine switch is on (IG), the power window components are installed improperly or the motor is overheated.
NG -- INSTALL PARTS CORRECTLY
No comments:
Post a Comment