Sunday, January 5, 2020

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1404


HINT



Codes other than DTC B1623 and B1628 may be output at this time, but they are not related to this check.



C -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm



Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting



B -- REPLACE SIDE AIRBAG SENSOR RH (FOR REAR SIDE)



A -- Continue to next step.



31. CHECK REAR AIRBAG SENSOR RH



(a) Turn the engine switch off.



(b) Disconnect the cable from the negative (-) battery terminal.



NOTICE:



Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



(c) Return the side airbag sensor LH (for rear side) and side airbag sensor RH (for rear side) to their original positions and connect the



connectors.



(d) Interchange the rear airbag sensor LH with RH and connect the connectors to them.



(e) Connect the cable to the negative (-) battery terminal.



(f) Turn the engine switch on (IG), and wait for at least 60 seconds.



(g) Clear the DTCs stored in the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and



Clearing Diagnostic Trouble Codes/DTC Check / Clear.



(h) Turn the engine switch off.



(i) Turn the engine switch on (IG), and wait for at least 60 seconds.



(j) Check for DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic



Trouble Codes/DTC Check / Clear.



Result:



Text in Illustration



HINT



Codes other than DTC B1623 and B1628 may be output at this time, but they are not related to this check.



C -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm



Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting



B -- REPLACE REAR AIRBAG SENSOR RH

No comments:

Post a Comment