(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(d) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Navigation Receiver (for HDD)/Removal
OK -- Continue to next step.
3. REPLACE MULTI-MEDIA INTERFACE ECU
(a) Replace the multi-media interface ECU See: Accessories and Optional Equipment/Entertainment Systems/Entertainment System
Control Module/Service and Repair/Multi-Media Interface ECU/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for HDD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation
System/Service and Repair/Navigation Receiver (for HDD)/Removal
OK -- END
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for DVD): B1568,B159D,B159E,B15D9: Clock Device Disconnected
B159D - No Response from Operation Panel
B15D9 - Operation Panel Disconnected
DESCRIPTION
The display and navigation module display and radio receiver assembly (A/C control panel) are connected by the AVC-LAN communication line.
When an AVC-LAN communication error occurs between the display and navigation module display and radio receiver assembly (A/C control
panel), these DTCs will be stored.
No comments:
Post a Comment