(c) Disconnect the No. 2 floor wire from the front seat inner belt assembly LH.
(d) Connect the cable to the negative (-) battery terminal.
(e) Turn the engine switch on (IG).
(f) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPLACE NO. 2 FLOOR WIRE
OK -- REPLACE FRONT SEAT INNER BELT ASSEMBLY LH See: Restraints and Safety Systems/Seat Belt Systems/Seat
Belt/Service and Repair/Removal and Replacement/Rear Seat Inner Belt Assembly (for LH Side)/Removal
4. CHECK NO. 2 FLOOR WIRE (SHORT TO GROUND)
(a) Disconnect the No. 2 floor wire from the front seat inner belt assembly LH.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE NO. 2 FLOOR WIRE
No comments:
Post a Comment