After the inspection is completed, clear the DTCs.
PROCEDURE
1. REPLACE USB DEVICE OR "iPod"
(a) Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
(b) Turn the engine switch off.
HINT
When this DTC has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new
device when it is connected.
(c) Turn the engine switch on (ACC).
(d) Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
HINT
* If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction
occurred when an "iPod" was in use, use another "iPod" for the inspection.
NEXT -- Continue to next step.
2. CLEAR DTC
(a) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Audio and Visual System (w/ Navigation System).
NEXT -- Continue to next step.
3. RECHECK FOR DTC
(a) Recheck for DTCs.
HINT
If DTCs are detected frequently, replace the multi-media interface ECU.
OK:
No DTC is output.
NG -- REPLACE MULTI-MEDIA INTERFACE ECU See: Accessories and Optional Equipment/Entertainment
Systems/Entertainment System Control Module/Service and Repair/Multi-Media Interface ECU/Removal
OK -- USB DEVICE OR "iPod" WAS DEFECTIVE
From 08/2009
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/ Navigation System): B15DF: USB Communication Malfunction
B15DF - USB Communication Malfunction
DESCRIPTION
This DTC is stored when a malfunction occurs in communication error with USB device or "iPod".
INSPECTION PROCEDURE
HINT
After the inspection is completed, clear the DTCs.
No comments:
Post a Comment