Text in Illustration
(d) Reconnect the engine room junction block assembly connector.
(e) Reinstall the engine room junction block assembly.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (ENGINE ROOM JUNCTION BLOCK ASSEMBLY - BODY
GROUND)
OK -- REPLACE ENGINE ROOM JUNCTION BLOCK ASSEMBLY
From 08/2009
2GR-FE ENGINE CONTROL: SFI SYSTEM: P0171,P0172,P0174,P0175: System Too Lean (Bank 1)
P0175 - System Too Rich (Bank 2)
DESCRIPTION
The fuel trim is related to the feedback compensation value, not to the basic injection duration. The fuel trim consists of both the short-term and
long-term fuel trim.
The short-term fuel trim is fuel compensation that is used to constantly maintain the air fuel ratio at stoichiometric levels. The signal from the air fuel
ratio sensor indicates whether the air fuel ratio is rich or lean compared to the stoichiometric ratio. This triggers a reduction in the fuel injection
volume if the air fuel ratio is rich and an increase in the fuel injection volume if it is lean.
Factors such as individual engine differences, wear over time and changes in operating environment cause short-term fuel trim to vary from the
central value. The long-term fuel trim, which controls overall fuel compensation, compensates for long-term deviations in the fuel trim from the
central value caused by the short-term fuel trim compensation.
If both the short-term and long-term fuel trim are lean or rich beyond predetermined values, it is interpreted as a malfunction, and the ECM
illuminates the MIL and sets a DTC.
No comments:
Post a Comment