ON malfunction:
TYPICAL MALFUNCTION THRESHOLDS
Either of the following conditions is met: OFF malfunction (A) or (B) or ((C) and (D)), or ON malfunctions
- 2 detections are necessary per driving cycle:
- 1st detection; temporary flag ON
- 2nd detection; pending fault code ON
OFF malfunction (A):
OFF malfunction (B):
OFF malfunction (C):
OFF malfunction (D):
ON malfunction:
INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/U660E Automatic Transaxle
System/DTC Check / Clear.
PROCEDURE
1. CHECK OTHER DTCS OUTPUT (IN ADDITION TO DTC P0796)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
No comments:
Post a Comment