(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (SHORT TO B+)
OK -- Continue to next step.
48. CHECK WIRE HARNESS (SHORT TO GROUND)
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
NOTICE:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FRONT DOOR WIRE RH (SHORT TO GROUND)
OK -- Continue to next step.
49. CHECK SIDE AIRBAG SENSOR RH (FOR FRONT SIDE)
(a) Connect the connectors to the rear airbag sensor RH.
No comments:
Post a Comment