(b) Disconnect the engine room junction block assembly connector.
(c) Remove the EFI MAIN relay from the engine room relay block.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
Standard Resistance (Check for Short):
Text in Illustration
(e) Reinstall the EFI MAIN relay.
(f) Reconnect the engine room junction block assembly connector.
(g) Reinstall the engine room junction block assembly.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (ENGINE ROOM JUNCTION BLOCK ASSEMBLY - EFI
MAIN RELAY)
OK -- Continue to next step.
19. CHECK HARNESS AND CONNECTOR (ENGINE ROOM JUNCTION BLOCK ASSEMBLY - BODY GROUND)
(a) Remove the engine room junction block assembly.
(b) Disconnect the engine room junction block assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
No comments:
Post a Comment