INSPECTION PROCEDURE
PROCEDURE
1. CHECK DISC
(a) Check that the disc is not deformed or cracked.
OK:
No deformation or cracks on the disc
NG -- CHANGE DISC
OK -- Continue to next step.
2. DISC CLEANING
(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTICE:
Do not use a conventional record cleaner or anti-static preservative.
NEXT -- Continue to next step.
3. REPLACE DISC WITH ANOTHER AND RECHECK
(a) Replace the disc with another and recheck.
(b) Clear the DTC See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Audio and Visual System (w/ Navigation System).
(c) Recheck for DTC and check if the same trouble occurs again.
OK:
No DTC is output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
No comments:
Post a Comment