Alignment Control Module/Service and Repair/Components
OK -- END
Up to 08/2009
LIGHTING (EXT): LIGHTING SYSTEM: B2417,B2418: Headlight Beam Level Control Motor LH Malfunction
B2418 - Headlight Beam Level Control Motor RH Malfunction
DESCRIPTION
The headlight leveling motor receives a signal from the AFS ECU (headlight swivel ECU assembly) to operate. The AFS ECU (headlight swivel
ECU assembly) receives a signal indicating the operating conditions of the headlight leveling motor.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
PROCEDURE
1. CHECK FOR DTC
(a) Clear the DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Check for DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
OK:
DTC B2417 or B2418 is not output.
NG -- PERFORM ACTIVE TEST USING TECHSTREAM
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
2. PERFORM ACTIVE TEST USING TECHSTREAM
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
No comments:
Post a Comment