NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE REMOTE TOUCH (REMOTE OPERATION BOARD)
(a) Replace the remote touch See: Accessories and Optional Equipment/Navigation System/Navigation Display/Service and
Repair/Overhaul/Disassembly.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for DVD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
OK -- END
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): B1596,B1563: No Response from Remote Touch
B1596 - No Response from Remote Touch
B1563 - Remote Touch Disconnected
DESCRIPTION
The display and navigation module display and remote touch are connected by the MOST communication line.
When a MOST communication error occurs between the display and navigation module display and remote touch, these DTCs will be stored.
HINT
For the MOST network, the display and navigation module display is the master unit.
No comments:
Post a Comment