2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 588

Result:

HINT

* Electrical noise from radio waves generated by optional components or the wiring for those components may affect MOST

communication.

* This DTC may be stored when an MOST communication error occurs due to electrical noise.

B -- CHECK DTC

A -- Continue to next step.

2. REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)

(a) Remove optional components (including associated wiring).

NOTICE:

Do not remove optional components or associated wiring without the permission of the customer.

NEXT -- Continue to next step.

3. CHECK DTC

(a) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/Navigation System (for HDD).

(b) Recheck for DTCs and check if the same DTC is output again.

OK:

No DTCs are output.

NG -- CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY POWER SOURCE)

OK -- END

1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY POWER SOURCE)

(a) Disconnect the G16 multi-display controller sub-assembly connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(c) Measure the voltage according to the value(s) in the table below.