TYPICAL MALFUNCTION THRESHOLDS
OFF malfunction:
ON malfunction:
INSPECTION PROCEDURE
NOTICE:
Perform the universal trip to clear permanent DTCs See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/U660E Automatic Transaxle
System/DTC Check / Clear.
PROCEDURE
1. CHECK OTHER DTCS OUTPUT (IN ADDITION TO DTC P0776)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / ECT / Trouble Codes.
(e) Read the DTCs using the Techstream.
Result:
HINT
If a solenoid is stuck OFF, DTCs for several solenoids including the malfunctioning solenoid will be detected.
A -- INSPECT SHIFT SOLENOID VALVE SL2
B -- Continue to next step.
2. PERFORM ACTIVE TEST USING TECHSTREAM
NOTICE:
This test should always be performed with at least 2 people.
(a) Warm up the engine.
(b) Turn the engine switch off.
(c) Connect the Techstream to the DLC3.
(d) Turn the engine switch on (IG).
(e) Turn the Techstream on.
No comments:
Post a Comment