(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE COMBINATION METER MIRROR ECU
(a) Replace the combination meter mirror ECU See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Service and Repair/Removal and Replacement/Head-Up Display/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for DVD).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
OK -- END
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): B159C,B1567: No Response from Head Up Display
B159C - No Response from Head Up Display
B1567 - Head Up Display Disconnected
DESCRIPTION
The display and navigation module display and combination meter mirror ECU are connected by the AVC-LAN communication line.
When an AVC-LAN communication error occurs between the display and navigation module display and combination meter mirror ECU, these
No comments:
Post a Comment