(h) Measure the resistance between the radio receiver assembly and stereo component amplifier assembly according to the value(s) in the
table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK DTC
(a) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for DVD).
(b) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
Up to 08/2009
NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM (for HDD): B15D0: MOST Communication Malfunction
B15D0 - MOST Communication Malfunction
DESCRIPTION
This DTC is stored when the MOST network cannot be established after the master unit is activated.
HINT
* If a short occurs in a speaker circuit, the sound from the corresponding speaker will be low or almost impossible to hear. If the
volume is turned up in this situation, to prevent excessive current flow due to the short circuit, the stereo component amplifier
No comments:
Post a Comment