(b) Disconnect the TCM connectors.
(c) Turn the engine switch on (IG), and measure the voltage according to the value(s) in the table below when the shift lever is moved to
each position.
Standard Voltage:
Text in Illustration
HINT
*: The voltage will drop slightly due to lighting up of the back up light.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE TCM See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and
Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/U660E Automatic Transaxle/Removal
5. CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - TCM)
(a) Turn the engine switch off.
(b) Disconnect the TCM connector.
(c) Disconnect the park/neutral position switch connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
Standard Resistance (Check for Short):
No comments:
Post a Comment