NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
11. REPLACE SUSPENSION CONTROL ECU
(a) Temporarily replace the suspension control ECU with a new or normally functioning one See: Relays and Modules/Relays and
Modules - Steering and Suspension/Relays and Modules - Suspension/Suspension Control Module/Service and Repair/Components.
(b) Check for DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
OK:
DTC B2416 is not output.
NG -- REPLACE AFS ECU (HEADLIGHT SWIVEL ECU ASSEMBLY) See: Lighting and Horns/Headlamp/Headlamp
Alignment Control Module/Service and Repair/Components
OK -- END
Up to 08/2009
LIGHTING (EXT): LIGHTING SYSTEM: B241B: Front Height Control Sensor
B241B - Front Height Control Sensor
DESCRIPTION
The AFS ECU (headlight swivel ECU assembly) receives signals indicating the front height of the vehicle from the suspension control ECU.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK FOR DTC
(a) Clear the DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Check for DTCs See: Lighting and Horns/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
No comments:
Post a Comment