2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 1041

Text in Illustration

NG -- REPLACE FRONT DOOR WIRE LH

OK -- REPLACE NO. 2 FLOOR WIRE

55. CHECK PRESENT DTC

(a) Turn the engine switch on (IG), and wait for at least 60 seconds.

(b) Check for present DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/DTC Check / Clear.

Result:

HINT

Codes other than present DTC B1627 and B1637 may be output at this time, but they are not related to this check.

B -- CHECK REAR AIRBAG SENSOR LH

A -- Continue to next step.

56. CHECK SIDE AIRBAG SENSOR LH (FOR REAR SIDE)

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Interchange the side airbag sensor RH (for rear side) with side airbag sensor LH (for rear side) and connect the connectors.

(d) Connect the cable to the negative (-) battery terminal.

(e) Turn the engine switch on (IG), and wait for at least 60 seconds.

(f) Clear the DTCs stored in the the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and

Clearing Diagnostic Trouble Codes/DTC Check / Clear.

(g) Turn the engine switch off.

(h) Turn the engine switch on (IG), and wait for at least 60 seconds.